Skip to content

Professional Dental Products

The Guide Right™ system is used to fabricate a Diagnostic Guide, which is evaluated with any cone beam software, corrected if necessary and re-fabricated into a Surgical Guide for accurately placing dental implants.

For sterilizing Guide Right™ parts, we recommend placing in Betadine or Peridex before using, as well as after the Guide is made.

Filter and sort

88 products

Clear all
A silver metal drill with the label ‘Flatt’ on the front, labeled 30 millimeters long and an OD of 4.4 millimeters. A silver metal drill with the label ‘Flatt’ on the front.

4.4 mm Flattening Drill

$25.00

4.4 mm Flattening Drill

4.4 mm Flattening Drill

A blue square metal box. The box says ‘Guide Right™ by DePlaque, a ‘dp’ logo, ‘www.deplaque.com,’ and 4.4 millimeter Depth Stop Drills. An open blue square box with 5 rows of 6 drill storage slots each. The top row starts with 3.0 to 3.9 millimeter diameter drills in lengths from 6 to 15 millimeters. The bottom row ends with 1.5 to 2.2 millimeter diameter drills in lengths from 6 to 15 millimeters.

4.4 mm Depth Stop Drill Set

$1,500.00

4.4 mm Depth Stop Drill Set

4.4 mm Depth Stop Drill Set

A diagram depicting the different components of the Bending Tool and accessories. A hex driver with a black handle and a 0.035 inch label.

0.035" Hex Driver

$15.00

0.035" Hex Driver

0.035" Hex Driver

A diagram depicting the different components of the Bending Tool and accessories. A hex driver with a red handle and a 5/64 inch label.

5/64" Hex Driver

$15.00

5/64" Hex Driver

5/64" Hex Driver

A silver metal drill with the label ‘Pilot’ on the front, labeled 35 millimeters long and an OD of 4.4 millimeters. A silver metal drill with the label ‘Pilot’ on the front.

5.0 mm Pilot Drill

$25.00

5.0 mm Pilot Drill

5.0 mm Pilot Drill

A silver metal drill with the label ‘Flatt’ on the front, labeled 30 millimeters long and an OD of 4.9 millimeters. A silver metal drill with the label ‘Flatt’ on the front.

5.0 mm Flattening Drill

$25.00

5.0 mm Flattening Drill

5.0 mm Flattening Drill

A silver metal drill with the label ‘Pilot’ on the front, labeled 35 millimeters long and an OD of 3.85 millimeters. A silver metal drill with the label ‘Pilot’ on the front.

3.85 mm Pilot Drill

$25.00

3.85 mm Pilot Drill

3.85 mm Pilot Drill

A silver metal drill with the label ‘Flatt’ on the front, labeled 30 millimeters long and an OD of 3.8 millimeters. A silver metal drill with the label ‘Flatt’ on the front.

3.85 mm Flattening Drill

$25.00

3.85 mm Flattening Drill

3.85 mm Flattening Drill

A silver metal cylinder with a circular cut out. The top is cone shaped with a square tip. The cylinder is 20 millimeters long with an OD of 8 millimeters, and the cone is 7 millimeters long. There is a 3/32 inch channel opening. A silver metal cylinder with a circular cut out. The top is cone shaped with a square tip.

Handheld Drill Handle

$25.00

Handheld Drill Handle

Handheld Drill Handle

A hollow metal cylinder with a lip around the top edge.

Serial Guide Sleeve Insert - 1.7 mm for 4.5 mm Guide Sleeve

$20.00

Serial Guide Sleeve Insert - 1.7 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 1.7 mm for 4.5 mm Guide Sleeve

A hollow metal cylinder with a lip around the top edge.

Serial Guide Sleeve Insert - 1.0 mm for 4.5 mm Guide Sleeve

$20.00

Serial Guide Sleeve Insert - 1.0 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 1.0 mm for 4.5 mm Guide Sleeve

A hollow metal cylinder with a stepped notch and a thinner bottom third.

4.5 mm Fabrication Insert (FABIN)

$20.00

4.5 mm Fabrication Insert (FABIN)

4.5 mm Fabrication Insert (FABIN)

A hollow metal cylinder with a stepped notch and a thinner bottom third.

5.3 mm Fabrication Insert (FABIN)

$25.00

5.3 mm Fabrication Insert (FABIN)

5.3 mm Fabrication Insert (FABIN)

A hollow metal cylinder with a stepped notch and a thinner bottom third.

5.0 mm Fabrication Insert (FABIN)

$25.00

5.0 mm Fabrication Insert (FABIN)

5.0 mm Fabrication Insert (FABIN)

A hollow metal cylinder with a stepped notch and a thinner bottom third.

4.0 mm Fabrication Insert (FABIN)

$20.00

4.0 mm Fabrication Insert (FABIN)

4.0 mm Fabrication Insert (FABIN)

2-Piece Guide Post Upper Removable Part (URP) with Cap - OD 2.0 mm

$10.00

2-Piece Guide Post Upper Removable Part (URP) with Cap - OD 2.0 mm

2-Piece Guide Post Upper Removable Part (URP) with Cap - OD 2.0 mm

Search

Shopping Cart

Your cart is currently empty

Shop now