Professional Dental Products

The Guide Right™ system is used to fabricate a Diagnostic Guide, which is evaluated with any cone beam software, corrected if necessary and re-fabricated into a Surgical Guide for accurately placing dental implants.

For sterilizing Guide Right™ parts, we recommend placing in Betadine or Peridex before using, as well as after the Guide is made.

Filter and sort

88 products

Clear all

Filter and sort

Sort by

Price

$ From

$ To

Price range mininum Price range maximum

A diagram depicting the different components of a 2-Piece Guide Post and Upper Removable Part.

A metal octagonal lower shaft, with a rectangular platform above and a hollow cylinder top.

2-Piece Straight Guide Post - No Offset

$30.00

2-Piece Straight Guide Post - No Offset

Guide Sleeve - Without Cleat - 2.3 mm

$10.00

Guide Sleeve - Without Cleat - 2.3 mm

A singular silver D (second largest size) interproximal brush shown horizontally on a white background.

Silverline Brushes - Size D (100 Pack)

$200.00

Silverline Brushes - Size D (100 Pack)

A hollow metal cylinder with a lip around the top edge.

Serial Guide Sleeve Insert - 3.5 mm for 4.5 mm Guide Sleeve

$20.00

Serial Guide Sleeve Insert - 3.5 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 2.25 mm for 4.5 mm Guide Sleeve

$20.00

Serial Guide Sleeve Insert - 2.25 mm for 4.5 mm Guide Sleeve

A singular silver metal drill shown vertically.

3/32" Plaster Drill

$4.00

3/32" Plaster Drill

Serial Guide Sleeve Insert - 3.25 mm for 4.5 mm Guide Sleeve

$20.00

Serial Guide Sleeve Insert - 3.25 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 2.0 mm for 4.5 mm Guide Sleeve

$20.00

Serial Guide Sleeve Insert - 2.0 mm for 4.5 mm Guide Sleeve

2-Piece Guide Post - 3.0 mm Offset Lower Part

$20.00

2-Piece Guide Post - 3.0 mm Offset Lower Part

Guide Sleeve - Without Cleat - 2.0 mm x 8.0 mm

$10.00

Guide Sleeve - Without Cleat - 2.0 mm x 8.0 mm

2-Piece Guide Post - 2.5 mm Offset Lower Part

$20.00

2-Piece Guide Post - 2.5 mm Offset Lower Part

A hollow metal cylinder with a stepped notch and a thinner bottom half.

Straight Guide Post - 3.0 mm x 16 mm

$25.00

Straight Guide Post - 3.0 mm x 16 mm

Straight Guide Post - 2.0 mm x 25 mm

$25.00

Straight Guide Post - 2.0 mm x 25 mm

A short hollow metal cylinder with two cleats attached on the right.

Wide Guide Sleeve - With Cleat - 5.3 mm

$20.00

Wide Guide Sleeve - With Cleat - 5.3 mm

Guide Sleeve - Without Cleat - With Lip - 4.5 mm x 6 mm

$10.00

Guide Sleeve - Without Cleat - With Lip - 4.5 mm x 6 mm

Long 2-Piece Guide Post Upper Removable Part (URP) - OD 3.0 mm

$10.00

Long 2-Piece Guide Post Upper Removable Part (URP) - OD 3.0 mm

Guide Sleeve - With Cleat - 3.9 mm x 8 mm

$20.00

Guide Sleeve - With Cleat - 3.9 mm x 8 mm

Serial Guide Sleeve Insert - 2.75 mm for 4.5 mm Guide Sleeve

$20.00

Serial Guide Sleeve Insert - 2.75 mm for 4.5 mm Guide Sleeve

2-Piece Guide Post Upper Removable Part (URP) - OD 4.9 mm

$10.00

2-Piece Guide Post Upper Removable Part (URP) - OD 4.9 mm

A maroon rectangular metal box with a white ‘dp’ on the lid.

A open maroon rectangular metal box with 8 sizes of gold drills. The box says ‘Guide Right™ by DePlaque, 3.0 millimeter Lindemann Depth Stop Drills.

3.0 mm Lindemann Depth Stop Drill Set

$400.00

3.0 mm Lindemann Depth Stop Drill Set

A silver metal drill with a curved rectangle notch, labeled 30 mm long and an ID of 4.85 millimeters and an OD of 4.9 millimeters.

A silver metal drill with a curved rectangle notch in the center.

5.0 mm Punch Drill

$25.00

5.0 mm Punch Drill

A hollow metal cylinder with a stepped notch and a thinner bottom third.

4.84 mm Fabrication Insert (FABIN)

$20.00

4.84 mm Fabrication Insert (FABIN)

2-Piece Guide Post - 3.5 mm Offset Lower Part

$20.00

2-Piece Guide Post - 3.5 mm Offset Lower Part

5.0 mm Depth Stop Drill Set

$1,500.00

5.0 mm Depth Stop Drill Set

Previous Page 1 2 3 4 Next Page

2-Piece Straight Guide Post - No Offset

2-Piece Straight Guide Post - No Offset

2-Piece Straight Guide Post - No Offset

Guide Sleeve - Without Cleat - 2.3 mm

Guide Sleeve - Without Cleat - 2.3 mm

Guide Sleeve - Without Cleat - 2.3 mm

Silverline Brushes - Size D (100 Pack)

Silverline Brushes - Size D (100 Pack)

Silverline Brushes - Size D (100 Pack)

Serial Guide Sleeve Insert - 3.5 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 3.5 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 3.5 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 2.25 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 2.25 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 2.25 mm for 4.5 mm Guide Sleeve

3/32" Plaster Drill

3/32" Plaster Drill

3/32" Plaster Drill

Serial Guide Sleeve Insert - 3.25 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 3.25 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 3.25 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 2.0 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 2.0 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 2.0 mm for 4.5 mm Guide Sleeve

2-Piece Guide Post - 3.0 mm Offset Lower Part

2-Piece Guide Post - 3.0 mm Offset Lower Part

2-Piece Guide Post - 3.0 mm Offset Lower Part

Guide Sleeve - Without Cleat - 2.0 mm x 8.0 mm

Guide Sleeve - Without Cleat - 2.0 mm x 8.0 mm

Guide Sleeve - Without Cleat - 2.0 mm x 8.0 mm

2-Piece Guide Post - 2.5 mm Offset Lower Part

2-Piece Guide Post - 2.5 mm Offset Lower Part

2-Piece Guide Post - 2.5 mm Offset Lower Part

Straight Guide Post - 3.0 mm x 16 mm

Straight Guide Post - 3.0 mm x 16 mm

Straight Guide Post - 3.0 mm x 16 mm

Straight Guide Post - 2.0 mm x 25 mm

Straight Guide Post - 2.0 mm x 25 mm

Straight Guide Post - 2.0 mm x 25 mm

Wide Guide Sleeve - With Cleat - 5.3 mm

Wide Guide Sleeve - With Cleat - 5.3 mm

Wide Guide Sleeve - With Cleat - 5.3 mm

Guide Sleeve - Without Cleat - With Lip - 4.5 mm x 6 mm

Guide Sleeve - Without Cleat - With Lip - 4.5 mm x 6 mm

Guide Sleeve - Without Cleat - With Lip - 4.5 mm x 6 mm

Long 2-Piece Guide Post Upper Removable Part (URP) - OD 3.0 mm

Long 2-Piece Guide Post Upper Removable Part (URP) - OD 3.0 mm

Long 2-Piece Guide Post Upper Removable Part (URP) - OD 3.0 mm

Guide Sleeve - With Cleat - 3.9 mm x 8 mm

Guide Sleeve - With Cleat - 3.9 mm x 8 mm

Guide Sleeve - With Cleat - 3.9 mm x 8 mm

Serial Guide Sleeve Insert - 2.75 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 2.75 mm for 4.5 mm Guide Sleeve

Serial Guide Sleeve Insert - 2.75 mm for 4.5 mm Guide Sleeve

2-Piece Guide Post Upper Removable Part (URP) - OD 4.9 mm

2-Piece Guide Post Upper Removable Part (URP) - OD 4.9 mm

2-Piece Guide Post Upper Removable Part (URP) - OD 4.9 mm

3.0 mm Lindemann Depth Stop Drill Set

3.0 mm Lindemann Depth Stop Drill Set

3.0 mm Lindemann Depth Stop Drill Set

5.0 mm Punch Drill

5.0 mm Punch Drill

5.0 mm Punch Drill

4.84 mm Fabrication Insert (FABIN)

4.84 mm Fabrication Insert (FABIN)

4.84 mm Fabrication Insert (FABIN)

2-Piece Guide Post - 3.5 mm Offset Lower Part

2-Piece Guide Post - 3.5 mm Offset Lower Part

2-Piece Guide Post - 3.5 mm Offset Lower Part

5.0 mm Depth Stop Drill Set

5.0 mm Depth Stop Drill Set

5.0 mm Depth Stop Drill Set

Search

Recent searches

Shopping Cart