Guide Sleeve - Without Cleat - With Lip - 3.1 mm x 5 mm

The 3.1 mm Guide Sleeve Without Cleat With Lip is designed with a lip which secures the stereolithographic printed Guide Sleeve so it will not slip through the printed guide hole. For use with printed guides only.

Dimensions:

• ID 3.06 mm at apex top x OD 3.75 mm x 5.04 mm L
• OD 4.5 mm lip x .05 mm lip thickness

Pair with:

• 3.0 mm Lindemann Depth Stop Drill Set